What Grit Sandpaper for Drywall
Drywall sanding is a critical step that influences the quality of your finished walls. Even the smoothest joint compound application can look uneven if the sanding is not executed correctly. Knowing which grit sandpaper to use for drywall to use at different stages ensures that your surface becomes smooth and even. The process is less about pressure and more about precision.
When performed carefully, drywall sanding levels joints, eliminates imperfections, and results in a flawless, seamless surface ready for painting.
Understanding Grit Numbers for Drywall
The grit number on sandpaper shows how coarse or fine the abrasive surface is. A smaller number means the sandpaper is coarse and removes material quickly, while a larger number creates a fine surface. Choosing the right drywall sanding grit prevents damage such as surface gouging, deep scratches, or uneven surfaces.
If the grit is too coarse, it can expose joint tape or leave swirl marks that remain visible after painting. If it’s too fine too early, it can smooth over rough spots ineffectively. The goal is to move in a stepwise progression of grits for a seamless finish.
Ideal Grit Sequence for Sanding Drywall
Professional drywall finishers typically follow a progressive grit progression to achieve optimal results:
• 100–120 grit: Used for initial sanding to remove heavy ridges after joint compound application. This grit should be used lightly to prevent surface tearing.
• 120–150 grit: Perfect for blending seams once the major imperfections are removed. This grit provides the main levelling phase.
• 180–220 grit: Best for pre-paint sanding. It creates a consistent surface without imperfections.
This sequence ensures each layer of compound is evenly finished, resulting in a long-lasting wall.
Must-Have Drywall Sanding Tools
Using proper tools is as important as selecting the right grit. Quality equipment helps maintain consistent sanding results, reduces fatigue, and keeps dust under control.
Common tools include:
• Hand sander for detail work
• Telescopic pole sander for ceilings
• Sanding sponges for corners and curved areas
• Sanding screens for better dust dispersion
• Mask to prevent dust what grit sandpaper for drywall exposure
• Angle light for better visibility
These tools help ensure smooth, uniform results without damaging the drywall paper.
How to Sand Drywall Like a Pro
Sanding drywall is a careful process. Following professional techniques prevents visible defects and ensures your work looks flawless once painted.
1. Let the Joint Compound Dry Completely
Always wait for the compound to dry fully before sanding. Partially dried mud will create lumps and ruin your finish. Fully cured compound turns into fine dust when sanded, allowing for smooth sanding.
2. Apply Light, Even Pressure
Avoid pressing too hard. Let the sandpaper do the work while maintaining steady strokes. Excessive pressure can expose tape.
3. Feather the Edges
Blend the joint compound smoothly into the drywall using long, even strokes. Focus on seams rather than flat surfaces to create a invisible appearance.
4. Use Angled Lighting
Shine a light across the wall’s surface to highlight flaws that might not be visible head-on. This ensures all uneven areas are addressed before painting.
5. Switch to Finer Grit for Final Passes
Once the wall feels flat and smooth, move to 180–220 grit sandpaper. This stage removes micro-scratches and prepares the wall for priming or painting.
Tips for Sanding Edges and Corners
Corners and edges need careful sanding. Use a fine-grit sanding sponge or folded sandpaper to reach these areas. Sand one side at a time with light passes to avoid damaging the tape or paper.
For inside corners, a few light passes are usually enough to eliminate ridges without thinning the surface material. Controlled sanding is the key to maintaining joint integrity.
What Not to Do When Sanding Drywall
Many DIY finishers make the mistake of being too aggressive or skipping crucial steps. To achieve a high-quality outcome, avoid the following:
• Removing too much compound
• Starting with too low a grit number
• Forcing the sandpaper into the wall
• Skipping angled inspection lighting
• Not using protective gear
Time, care, and accuracy matter more than speed during drywall sanding.
Preparing Drywall for Painting
Before applying paint, ensure that the wall is completely free from debris and fine powder. Wipe the surface with a slightly wet sponge or a vacuum attachment designed for drywall dust. Check all areas under bright illumination to what grit sandpaper for drywall compound? confirm a consistent finish. Using 180–220 grit sandpaper for drywall before painting ensures a smooth and receptive surface for primer adhesion.
A properly sanded wall allows primer and paint to bond evenly, preventing blotches and ensuring a clean, flawless finish.
Final Thoughts
Mastering the correct drywall sanding grit to use at each stage can elevate the quality of your walls. Start with medium grit to remove rough patches, move to finer grits for blending, and finish with ultra-fine sanding for that professional surface.
By combining the right tools, lighting, and a steady approach, you can achieve a flawless drywall finish that looks professional under any paint or lighting condition. Careful sanding and control are the true secrets to expert-level drywall finishing.